|
DSO094 is the first two-channel member of JYE Tech oscilloscope family. It not only can work in commonly used Y/T mode but also work in Y/X mode. The Y/X mode opens a new measurement area since it can graph relationships of any two signals.
Features:
- 10MHz analog bandwidth
- 50Msps real-time sampling rate on each channel
- Vertical sensitivity 10mV/Div to 2V/Div (1X probe) and 0.1V/Div to 20V/Div (10X probe)
- Record length 500 - 8000 points on each channel adjustable
- Trigger position adjustable and trig point indicated
- Trigger sensitivity 0.2div - 4div adjustable
- Save/Recall up to 4 captures of maximum record length
- Screen image hardcopy via USB
- Firmware upgradable via USB
- Battery/USB powered
- Dimension: 140mm X 70mm X 30mm
- Weight: 190 gram (excluding probe and battery)
094 has some unique features that are not commonly found in many similar protable oscilloscopes:
- It can be placed in "Persistent Display" mode that keeps waveforms on screen until you erase them. This is very useful when combined with NORMAL trigger mode to capture and compare multiple waveforms that meet certain trig condition.
- You can manually erase waveform and display. This will help you to get better viewing result especially for slow signal graphing.
- The trigger sensitivity is adjustable. This enhances the stability of capturing noisy signals.
094 is very easy and straightforward to use. No annoying command navigations. Parameters are logically grouped and can be fast adjusted with rotary encoder. Special operations are clearly listed and done by "modeless" menu which you can bring up and execute any time no matter what mode you was in. 094 comes with rugged enclosure and is battery powered This is ideal for field applications.
Standard 094 package includes two 10X/1X switchable BNC probe and a 3.7V/1200mAh Li-ion batter (already attached on the inner side of back cover).
Specification:
Vertical
- Number of Channel: 2
- Analog Bandwidth: 0 - 10MHz
- Sensitivity: 10mV/Div -- 2V/Div
- Resolution: 8-bit
- Input Impedance: 1M ohm
- Maximum Input voltage: 50Vpk (for 1X probe) and 400Vpk (for 10X probe)
- Coupling: DC, AC, GND
Horizontal
- Max Real-time Sampling Rate: 50MSps
- Timebase: 0.2us/Div - 10m(minute)/Div
- Record Length: 500 - 8000 points (each channel) changeable
- Run/Hold Modes: one button switchable
Trigger
- Trigger Modes: Auto, Normal, Single
- Trigger Types: Rising/falling edge
- Trigger Sources: Ch 1 or Ch 2
- Trigger sensitivity 0.2div - 4div adjustable
- Trigger Position: 0% - 100% of capture buffer adjustable
- Trig Point Indicator: Yes
Other Features
- Y/T mode and Y/X mode selectable
- Save/Recall up to 4 captures
- Screen image hardcopy
- USB connection for data transfer and firmware upgrade
- Rotary encoder for quick parameter setting
Display
- 2-inch 128 X 64 black-and-white dot-matrix LCD
- Backlight ON/OFF control
- Contrast adjustable
Power Supply
- 3.7V Li-ion battery/USB
- Supply Current: 300mA @ 3.7V(LCD backlight ON, typical).
- Built-in charger
Physical
- Dimension: 140mm X 70mm X 30mm
- Weight: 190 gram (including battery)
Documents:
|
