Smart LED Strip RGB SK6812 IC / SMD5050 LEDs. The SK6812 is an RGB LED with a control IC built right into the LED.
This RGB LED strip allows you to individually control the color and intensity of all 300 RGB LEDs on this 5m strip. The SK6812 even allows you to set the PWM Level for each color with an 8 Bit resolution (24bits per LED). Each LED has its own SK6812 IC and current limiting resistors. Check the datasheets below for more information on how to drive these strips.
Features:
- Input voltage: DC 5V
- Led Qty: 144 SMD 5050 LEDs /meter (144 in total)
- Power(W/m): 40 W/m
- Signal: SK6812 IC (compatible with WS2811)
- Dimensions: 1000x10.4x4.3mm
- Packaging: 1M on reel
- IP67 waterproof
- Maximum Pixel errors: 1%
- Black PCB
- Connector: 2-pin JST SM
- Strip can be cut into pieces after every single LED
Note: You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip!
Pinout:
- Red: 5V
- Blue: 5V
- Yellow: GND
- Green: DAT
Documents:
|