Stock: 0

ITDB02 is a TFT LCD Screen Module, 40-pin interface, it is not just a LCD breakout but also includes the touchscreen, SD card socket and Flash design. So it’s a powerful extension module for your project.

ITDB02-5.0 module is 5.0" TFT LCD with 65K color 800 x 480 resolutions. The controller of this LCD module is SSD1963, it supports 16bit data interface with 4 wires control interface. Moreover, this module includes the touch screen and SD card socket. This LCD is supported by UTFT Arduino library.

The IDTB02 layouts a 40-pin interface for your project, the interface includes LCD bus, SD card bus, touch screen bus and the Flash bus(NC).

The pins named with “D_” belong to the touchscreen bus, the pins named with “SD_” belong to the SD bus, the pins named with “F_” belong to the Flash bus.

ITDB02 works at 3.3v DC, if you need to connect the module with the 5v voltage I/O, you need to add a 30k and a 20k resistor to reduce voltage (see datasheet).

And we have a ITDB02 Arduino MEGA shield , you can use it to connect the ITDB02 LCD module with Arduino MEGA board.

Specification:

• Model IM120419008
• Display Size: 5.0”
• Display Resolution: 780 x 480
• Display Interface: Parallel 16 Bit
• Display Controller: SSD1963
• SD Card Socket
• Touch Screen
• Board Size: 11.75×8.93cm

Documents:

• Datasheet of SSD1963
• Datasheet of ITDB02-5.0
• Schematic
• Demo code
• UTFT Library
• Arduino Display Support Forum