|
This product is currently out of stock. You might want to set a notification to receive a short one-time email when the product returns to stock next time.
The DgTiny25 sports two Grove connectors, and is quite interesting when you need to develop a special device with an I2C and/or another functionality compatible with Grove cables.
ATtinys 25,45,85 have 6 I/O including the reset line with limited functionality. The two I2C lines of the Grove I2C connector, compatible with USI library are already connected with 2 kOhm pull-ups. The second Grove connector can be wired on any pin.
The board accept on one side a SO8 and on the other side a DIP8, with the possibility to use a socket has take benefit of the AutoISP system from microtherion and have no limitation on the functionnalities of pins.
The SMD package is more compact and is programmed with a single in line 1.25mm pitch connector. Indeed, the 6 holes never get a connector: the programming cable has a 6-pin male connector; insert partly, press on side and do not move for the few seconds of programming. Hundreds of boards have been programmed this way. For the development prototype, it is of course convenient to solder the compatible Molex connector supplied with the DgTiny24.
Note: Comes without any ATtiny microcontroller, the ATtiny has to be purchased separately.
Documents:
|
